Page Tools: Save Email Print Comment

Please click on the appropriate image or image title to view the product details.

	Elcometer Marine Inspection Kits The International Maritime Organisation (IMO) regulation for the Performance Standard for Protective Coatings (PSPC) for Salt Water Ballast Tanks, resolutions MSC.215(82) and MSC.216(82), effective from 1st July 2008 for new ship builds, brings with it a number of challenges for the Marine Coatings Inspector. The IMO regulation not only stipulates a rigorous dry film thickness verification regime, but also requires the inspection of surface profile and cleanliness, together with the recording of temperature, relative humidity and dewpoint at each stage of the build process. Available in two versions, Standard and Top, the Elcometer Marine Inspection Kits have been specifically designed for this purpose and contain all the equipment required by the Marine Coatings Inspector to test and monitor all the parameters stipulated in the new IMO regulation.
	Inspection Kits 1, 2 & 3 Meeting all your inspection needs, the Elcometer Kit 3 offers all the capabilities of Kit 2, but allows for less error. Faster, more accurate gauges are supplied including the Elcometer 319 digital dewmeter and the Elcometer 224 Model B Digital Surface Profile Gauge. This kit is a must have for the Inspector.
	134 CSN Kit - Chloride, Sulphate & Nitrate Ions Contamination Kit Designed to accurately measure the individual concentration of chlorides, sulphates and nitrates on the job site, this kit is an easy to use kit allowing the user to measure the levels of chlorides, sulphates and nitrates from sample.
	138 Bresle Conductivity Kit for Salt Contamination This simple kit is used to measure the level of contaminants on a surface. Supplied with a conductivity meter and bresle patches for 25 tests, this is a required kit on many sites around the world.
	139 Amine Blush Test Kit One of the most problematic issues in protective coatings today, amine blush or amine bloom is caused by amine-cured epoxy coatings drying in a low ambient temperature or a high humidity environment. This simple site test allows the immediate identification of amine on the coating's surface.

End of Page