The Elcometer 224 provides the very latest in surface profile technology. Accurate and user friendly, this surface profile gauge is available with (Elcometer 224 Model T) or without memory (Elcometer 224 Model B) and statistics. Memory versions can store up to 50,000 readings in 999 batches.

• Fast reading rate of 40 readings per minute.
• Accurate, immediate and repeatable results everytime.
• Cost per test is significantly lower than other test methods.
• Intuitive menus in multiple languages enables use straight from the box.
• Large backlit screen makes viewing readings easy.
• Digital display prevents reading intepretation errors.
• Stores up to 50,000 readings in 999 batches (Model T only).
• Readings can be downloaded to a PC and reports can be created in seconds, using ElcoMaster™ (Model T only).
• Statistics are calculated and displayed in real time.
• Counted average mode stores the average value of a preset number of readings (Model T only).
• Measure profiles up to 50 microns (20 mils) in a single gauge.
• Tough tungsten carbide tip, replaceable in the field, can be used for up to 20,000 readings.

Statistics are available on both models and can be displayed on the screen as readings are taken. This feature saves time when assessing large surface areas and an overall, average profile can be quickly established. The following statistics can be displayed.

Icon	Icon Meaning	Description
	Number of Readings	The running value for the number of readings taken in a group.
	Mean	The average of a group of readings; the sum of the individual readings divided by the number of readings.
	Standard Deviation	A statistical measurement of the spread of values in a group of readings.
	Highest Reading	Highest reading taken in a group.
	Lowest Reading	Lowest reading taken in a group.

* Patent Pending (US patent application number 60/902,419)

The Elcometer 224 T works in the same way as the model B, but has the advantage of a large built-in memory to accurately record each measurement.

The memory is able to store up to 50,000 readings in 999 batches. This enables extremely quick readings to be automatically stored, ideal for measuring large surface areas.

A statistical analysis is also displayed on the gauge and stored within each batch.

Data can be downloaded to a PC and, using ElcoMaster™ Software (supplied free of charge with this gauge), detailed reports can be created in seconds. Data can also be transferred to a spreadsheet.

When connected to a miniprinter, results can be printed out and attached to the inspection report immediately, on site, before creating the official report using ElcoMaster™.

The Elcometer 224 T operates in one of three modes; immediate, batch or counted average.

• Immediate mode: The gauge takes readings and calculates statistics but does not store any readings in the momery (this is known as rolling statistics).
• Batch mode: The gauge takes measurements and stores the individual readings and the statistical analysis in the momery. Batch mode, or batching, allows data to be collected in groups to allow easier analysis of large or complex structures. The Elcometer 224 T has a memory capacity for up to 50,000 readings in up to 999 batches.
• Counted average mode: The gauge will automatically calculate the average of a pre-determined number of readings. Each of these averages is recorded within the batch and stored in the memory.

* Patent Pending (US patent application number 60/902,419)

The software has been designed to be familiar and intuitive to any PC user. When the gauge is connected to the PC, individual readings can be sent directly into the software for real time analysis or simply 'drag and drop' a batch from the gauge to the software.

You can store all of your associated job or inspection files, health and safety reports etc. within ElcoMaster™ - providing you with one programme that holds all of your inspection information in one place.

Viewing data and producing standard reports is achievable in just a few clicks. Fully customised reports can be produced quickly by using the ElcoMaster™ report designer.

In addition to the readings and charts, you can also assign a digital photograph to an individual batch of data, allowing you to visually display the inspection area in your reports. Batches can be combined for immediate comparison of data from various areas of the job site.

ElcoMaster™ features include:

• Create professional reports in seconds.
• Export reports to spreadsheets, text files or save as PDF or JPEG files.
• Copy and paste reports into other documents.
• Reports can be combined in order to clearly compare different batches.
• E-mail reports directly from ElcoMaster™.
• Assign batch identification tags.
• Batches can be renamed to clearly identify the inspection batch.
• Wide range of standard reports include;
  • Individual measurements
  • Statistics
  • Histograms
  • Individual line or bar charts
  • Log normal
  • Pie charts
• Fully customise reports using the ElcoMaster™ report designer tool.
• Include company graphics and logos on every report.
• Combine batches to compare readings or link batches together from different gauges into one comprehensive inspection file.
• Find feature to quickly locate a specific file or batch.