Paint/Coating Equipment >
Adhesion Testers > Elcometer 1940
 This automatic tester has been designed specifically for testing in confined areas, particularly on small components of irregular and awkward shapes, and with very low pull force.
Testing coatings and bond strength on fragile or thin substrates and components where the overall pull force must be strictly limited.
Operating in a similar way to all pull off testers, a test element (dolly) is adhered to the coating. The testing head is connected to the element and the force required to remove it is recorded.
- Portable and simple to use.
- Produces comparable test results both in the laboratory and on site.
- Precision gauge with both MPa (N/mm²) and p.s.i reading.
- Simple layout of control panel.
- Rate of tensile force increase is infinitely variable between zero MPa/sec (standstill) up to maximum rate (the rate depends on the size test element used).
- 110/230V mains power. Battery power is an optional extra.
- Testing of coatings on any shaped substrates, e.g. inside and outside pipe surfaces.
- Supplied in a solid aluminium case.
The Elcometer 1930 is supplied complete with a Calibration Certificate and:
- Automatic hydraulic pump unit with control display.
- Adaptor for mains power.
- PATT Testing Head 1kN
- Hydraulic cable.
| ELCOMETER PAT RANGE SELECTION GUIDE AND TEST ELEMENTS |
| Element Number |
Test Element Diameter |
Range |
Range Values valid for the following Models |
Part Number |
| mm |
inches |
MPa |
PSI |
| TE001 |
2.3 |
0.09 |
160 |
23200 |
Elcometer 1930 |
KT001910P001 |
| TE002 |
4 |
0.16 |
80 |
11600 |
Elcometer 1930 |
KT001910P002 |
| TE003 |
5.7 |
0.22 |
40 |
5800 |
Elcometer 1930 |
KT001910P003 |
| TE004 |
8.16 |
0.32 |
120 |
17400 |
Elcometer 1910, 1920/1, 1940 |
KT001910P004 |
| TE005 |
14.1 |
0.55 |
40 |
5800 |
Elcometer 1910, 1920/1, 1940 |
KT001910P005 |
| TE006 |
20 |
0.79 |
20 |
2900 |
Elcometer 1910, 1920/1, 1940 |
KT001910P006 |
| TE007 |
25 |
0.98 |
40 |
5800 |
Elcometer 1920/1, 1940/1 |
KT001910P007 |
| TE008 |
25 |
0.98 |
80 |
11600 |
Elcometer 1920/3, 1940/2 |
KT001910P008 |
| TE009 |
25 |
0.98 |
160 |
23200 |
Elcometer 1920/4 |
KT001910P009 |
| TE010 |
28.5 |
1.11 |
10 |
1450 |
Elcometer 1910, 1920/1, 1940 |
KT001910P010 |
| TE011 |
40 |
1.57 |
5 |
725 |
Elcometer 1910, 1920/1, 1940 |
KT001910P011 |
| TE012 |
50 |
2.0 |
3.2 |
460 |
Elcometer 1920/1, 1940 |
KT001910P012 |
| TE013 |
50 |
2.0 |
10 |
1450 |
Elcometer 1920/2, 1941/1 |
KT001910P013 |
| TE014 |
50 |
2.0 |
20 |
2900 |
Elcometer 1920/3, 1941/2 |
KT001910P014 |
| TE015 |
50 |
2.0 |
40 |
7200 |
Elcometer 1920/4 |
KT001910P015 |
| TE016 |
50 x 50 |
2.0 x 2.0 |
7.85 |
1140 |
Elcometer 1920/2, 1941/1 |
KT001910P016 |
| TE017 |
50 x 50 |
2.0 x 2.0 |
15.7 |
2270 |
Elcometer 1920/3, 1941/2 |
KT001910P017 |
| TE018 |
70.7 |
2.78 |
5 |
725 |
Elcometer 1920/2, 1941/1 |
KT001910P018 |
| TE019 |
70.7 |
2.78 |
10 |
1450 |
Elcometer 1920/3, 1941/2 |
KT001910P019 |
| TE020 |
70.7 |
2.78 |
20 |
2900 |
Elcometer 1920/4 |
KT001910P020 |
| Accuracy |
±1% of full scale |
| Power |
110/230V AC |
| Battery |
Optional |
| Hydraulic System Drive |
Two-step servo motor |
| Weight Complete in Case |
8.2kg (18lb) |
| Case Dimensions |
430 x 325 x 145mm (17 x 13 x 6") |
| Model |
Description |
Part Number |
| Elcometer 1930 |
Elcometer 1930 PATâ„¢ MICRO Adhesion Tester - AT101/1kN |
K0001930M001 |
| Can be used in accordance with: |
| ASTM D 4541 |
EN 24624 |
| ISO 4624 |
Data Sheet
Please, click HERE to read it in PDF format in separate window. |
|
|
